AC110V 853AAA BGA Rework Soldering Station Preheating Hot Air Gun Soldering HOT

Description

1. Inherite the characteristics of the 853A that the air gun heating element is made of ceramic heating core, and the heating wire is tightly wound on the ceramic skeleton with rapid and uniform heating. With the upgraded version of the fan, air volume is stronger than the ordinary fan and the service life is longer with spiral wind. 2. The machine has a self-test function full intelligent over-temperature, short- circuit, overload and fault display and protection functions. 3. Temperature correction function: Or replace the heating elements, soldering iron tips etc. Spare parts caused by temperature deviation, can use this function calibration temperature. The correction temperature range is -50°C~+50°C. 4. Celsius/Fahrenheit temperature display function: Meet different ma
1. Inherite the characteristics of the 853A that the air gun heating element is made
of ceramic heating core, and the heating wire is tightly wound on the ceramic
skeleton with rapid and uniform heating. With the upgraded version of the fan,
air volume is stronger than the ordinary fan and the service life is longer with
spiral wind.
2. The machine has a self-test function full intelligent over-temperature, short-
circuit, overload and fault display and protection functions.
3. Temperature correction function:
Or replace the heating elements, soldering iron tips etc. Spare parts caused by
temperature deviation, can use this function calibration temperature. The
correction temperature range is -50°C~+50°C.
4. Celsius/Fahrenheit temperature display function:
Meet different market needs to design the temperature display mode, you can
choose under customary interest.
Data:
Voltage : AC110V±10% 60Hz（US PLUG）
Max power consumption: 1200W
Hot Air Reworks parts
Airflow type brushless fan spiral out wind
Air Flow :120L/min
Temperature Stability: 100 °c -480 °c /212 °F ~896 °F
Display Type: LED
Handle cable length: ≥100cm
Soldering Iron parts:
Soldering iron heater
Solder iron holder blue Ferro-alloy iron holder
Soldering iron handle Blue iron handle
General Usage
1). Suitable for de-soldering and soldering BGA, SOIC, CHIP, QFP, PLCC package SMD IC,
Particularly suitable for de-soldering BGA module, computer motherboard north and south bridge,
all kinds of mobile phone motherboard SMT IC and LED lights.
2). Shrinking, Paint drying, adhesive removal, thawing, warming, Plastic welding etc.
Preheating station parts
Temperature Range : 50~ 300 °c or 50~400 °c /152~572 °F or 152~752 °F
Temperature Stability: ±2 °c
Display Type : LED
Area :120*120mm
Package included:see picture
On Aug-12-21 at 03:53:34 PDT, seller added the following information: